Custom Manufacturing ISO 9001 DFM Support

Endoscope Waterproof Connectors and Assembly Components

Designed for multi-pin waterproof connectors, cable interfaces and coordinated endoscope subassemblies, these custom-molded components combine functional geometry with production-ready part design. The molding plan is developed around accurate pin and connector alignment, stable sealing grooves and overmold interfaces, and protected cable routing through assembled components. Resin selection, gate location, parting lines and inspection points are matched to the mating parts, operating environment and expected production volume.

Accurate Pin and Connector Alignment
Stable Sealing Grooves and Overmold Interfaces
Application-Specific Resin Selection
DFM, Tooling and Repeat Production

Product Overview

Connector components developed for controlled fit and sealing interfaces

Endoscope connector components bring together locating features, seal interfaces and assembly clearances in a compact part. JingZhan develops the tooling and moulding process around the customer’s connector design and mating components. The word waterproof describes the intended assembly function, not a certified rating for every pictured item. Seal performance must be established through a defined assembled-product test.

Black connector body samples with multiple circular openings
Connector examples showing multiple openings and supporting body geometry.

DESIGN AND MANUFACTURING

Key processing requirements

Seal lands and mating geometry

Identify the faces and diameters that locate or compress a seal. Agree surface condition, allowable flash and dimensional acceptance at these locations. Include the actual seal, counterpart and fastening method in trial reviews rather than judging the moulded housing in isolation.

Openings and insert position

Check hole locations, connector cavities and any insert seats against the assembly stack. Where inserts are required, specify their material, retention and supply responsibility. Insert moulding or secondary installation is evaluated and quoted separately instead of assumed from a photograph.

Filling around complex sections

Review gates, vents and wall transitions around openings and ribs. Keep weld lines and ejector marks away from agreed critical areas where practicable. Trial samples should be examined for short shots, burrs, distortion and features that could obstruct assembly.

Validation based on the actual exposure

Provide the intended cleaning chemistry, temperature, pressure and exposure duration. Define any leak test, test fixture and pass criteria before qualification. No IP grade, immersion life or sterilisation compatibility is assigned without supporting project evidence.

Flanged and cylindrical black moulded interface components
Related interface components illustrate circular fits and mounting features; performance is drawing-dependent.

TECHNICAL SPECIFICATIONS

Parameters agreed for your part

Custom-manufacturing options, not common measured values for every pictured part.
Parameter Project specification
Process scope Custom moulded connector bodies and associated plastic assembly components.
Resin grade Engineering resin selected against mechanical, chemical and dimensional needs.
Sealing interfaces Customer-defined seal lands, grooves and counterpart geometry.
Connector layout Number, position and dimensions of openings to approved CAD.
Insert requirements Material, position and retention agreed; additional operations separately scoped.
Tolerances Specified by feature, with datum system and inspection method.
Leak-test scope Test conditions and acceptance criteria defined for the assembled design.
Packaging Protection for seal surfaces, contact areas and identified component sets.
Endoscope plastic component set arranged for inspection
A component-set view places connector and small assembly parts in their broader manufacturing context.

PRODUCTION AND REPEAT SUPPLY

Equipment, lead time and order planning

Tooling support can use CNC machining and EDM for cavity details, followed by injection moulding on a machine selected from the supplied 50–500-tonne equipment range. CMM or optical checks can be planned for locating and seal features. Dedicated leak or functional testing requires a separately agreed fixture, procedure and responsibility; the equipment list alone does not establish that validation.

Indicative planning only. Final MOQ and lead time are confirmed for the project.
Planning item Basis for quotation
DFM review Indicative 3–5 working days after complete drawings and requirements.
New tooling Indicative 6–8 weeks to first tool trial after tool-design approval and commercial release; corrections and customer validation are additional.
Order quantities Initial quotation-planning basis: a 500-piece pilot or 1,000-piece repeat batch per part number, resin and colour, subject to project quotation.
Repeat orders Indicative 10–15 working days after materials and the production slot are confirmed. Customer qualification, special processing and transit are additional.
Company tooling machining area
Tooling machining resources support the development of interface and cavity features.

Keep repeat orders on an approved baseline

Agree the drawing revision, resin grade, approved samples and critical-to-quality features before release. Record material lots and moulding conditions, inspect first-off parts and use cavity identification where specified. Define packaging, sampling and change approval so later deliveries can be compared with the same baseline. Tool maintenance and replacement inserts should be planned around actual production demand.

Tooling investment is quoted separately from the piece price. Share annual demand and release quantities so cavity count, procurement and batch cost can be reviewed together.

RELATED APPLICATIONS

Where these components can be used

Connector housings and interface bodies within customer-designed electronic endoscope assemblies.

Instrument cable and module interfaces requiring repeatable positioning and controlled seal contact geometry.

Related inspection-system connectors and plastic interface parts, subject to their own environmental requirements.

Company injection moulding production line
Production planning connects approved tooling, material and repeat moulding requirements.

These photographs show manufactured component examples, not finished medical devices. Medical suitability, biocompatibility, cleaning or sterilisation compatibility and device approval require a defined project scope and customer validation; they are not implied by appearance or resin name.

Discuss your drawing and supply requirements. Send CAD, resin preference, critical features, annual demand and release quantity. Contact our engineering team →

Technical Specifications

Process Custom precision plastic injection molding
Product Group Endoscope Waterproof Connectors and Assembly Components
Typical Applications multi-pin waterproof connectors, cable interfaces and coordinated endoscope subassemblies
Material Options PC/ABS, ABS, PA, POM, TPE and other engineering resins selected for device assembly and cleaning requirements
Engineering Focus accurate pin and connector alignment, stable sealing grooves and overmold interfaces, and protected cable routing through assembled components
Project Support DFM review, mold design, mold trials, assembly validation and repeat production
Customization Geometry, color, texture, resin, inserts and packaging can be developed to project requirements

E-mail Whatsapp