Custom Manufacturing ISO 9001 DFM Support

Medical Sampling Tubes and Connector Components

JingZhan develops custom medical sampling tubes and connector components for sample collection, transfer tubes and diagnostic connector assemblies. The molding plan is developed around consistent tube bores and cap interfaces, secure straight and elbow connections, and clean transparent surfaces for visual inspection. Resin selection, gate location, parting lines and inspection points are matched to the mating parts, operating environment and expected production volume.

Consistent Tube Bores and Cap Interfaces
Secure Straight and Elbow Connections
Application-Specific Resin Selection
DFM, Tooling and Repeat Production

Product Overview

Sampling components with controlled fit and identification

JingZhan manufactures custom sampling-tube mouldings and related connector components to approved customer designs. The engineering focus is on consistent bores, closure fit, connection geometry and controlled appearance, with the resin and supply condition matched to the intended sample-handling application.

Clear conical sampling tube component samples
Tube samples showing closure and tapered-body geometry.

DESIGN AND MANUFACTURING

Key processing requirements

  • Coordinate the tube and closure. Provide the cap, seal and mating CAD. Review neck dimensions, engagement and any handling or closure-force requirements using the assembled sample.
  • Control bores and slender walls. Assess core support, filling and cooling for longer tubular shapes. Agree the dimensions and methods used to check bore size, straightness and wall balance.
  • Define sample-contact requirements. Identify the intended sample, exposure and temperature conditions. Confirm the resin grade and any additive, surface or cleanliness requirement before trials.
  • Keep variant identification reliable. Specify colour references, part marking and packing labels where required. A coloured connector is not assumed to follow a particular clinical coding standard.
Clear tube samples with red closure caps
Tube-and-cap examples; colour and closure performance are customer-defined.
Group of tinted small moulded connector components
Related connector samples with different passage and engagement geometries.

TECHNICAL SPECIFICATIONS

Parameters agreed for your part

Custom-manufacturing options, not common measured values for every pictured part.
Parameter Project specification
Component type Custom sampling tubes, tubular parts, closures and related connector mouldings.
Resin options PP, PE, PC or other agreed grades reviewed against sample contact, clarity and assembly needs.
Capacity and dimensions Custom to drawings; pictured parts do not share a common volume or bore size.
Connection geometry Drawing-defined neck, cap, tube and connector interfaces.
Tolerance Critical bores, closure features and locating dimensions agreed with inspection methods.
Appearance and coding Approved colour, marking and permitted moulding marks; no standard coding is implied.
Functional checks Closure, retention or leak checks to the project test method and acceptance criteria.
Supply specification Packing, traceability and any cleanliness or sterilization requirements agreed before release.

PRODUCTION AND REPEAT SUPPLY

Equipment, lead time and order planning

CNC/EDM tool development and injection moulding are planned around the core length, gate position, resin and cavity count. JingZhan's listed moulding and dimensional-inspection equipment provides route options. Sampling and fixtures are selected for the tube and connector features rather than applying a blanket tolerance.

Indicative quotation planning only. Final MOQ and lead time are confirmed for the project.
Planning item Basis for quotation
DFM review Indicative 3–5 working days after complete drawings and requirements.
New tooling Indicative 4–6 weeks to first mould trial after tool-design approval and commercial release; corrections and customer validation are additional.
Order quantities Initial planning basis: 500-piece pilot or 1,000-piece repeat batch per part number, resin and colour, subject to quotation.
Repeat orders Indicative 10–15 working days after materials and the production slot are confirmed. Customer qualification, special processing and transit are additional.
Tinted elbow connector component sample
Separate elbow-connector example for reviewing port orientation and mating interfaces.

Keep repeat orders on an approved baseline

Approve the resin, part revision, closure samples and inspection plan before repeat orders. Keep variants separated and identify each shipment by part, revision, lot and quantity. Review tool repairs, colour or resin changes before the next affected batch, including any required new qualification samples.

Tooling investment is quoted separately from the piece price. Share annual demand and the quantity per release so cavity count, material procurement and batch cost can be reviewed together.

RELATED APPLICATIONS

Where these components can be used

  • Customer-designed specimen and laboratory sample-handling components.
  • Tube-and-closure assemblies for diagnostic-development projects.
  • Connector and transfer-interface mouldings used within validated equipment assemblies.

Examples are custom components, not prequalified collection devices. Sample compatibility, biological evaluation and any sterile supply condition must be established for the intended finished product.

Pair of clear slender moulded tube components
Slender tubular examples illustrating core support and dimensional-check requirements.

Discuss your drawing and supply requirements. Send CAD, resin preference, critical features, annual demand and release quantity. Contact our engineering team →

Technical Specifications

Process Custom precision plastic injection molding
Product Group Medical Sampling Tubes and Connector Components
Typical Applications sample collection, transfer tubes and diagnostic connector assemblies
Material Options customer-specified transparent or engineering resins selected according to the intended use and applicable regulatory requirements
Engineering Focus consistent tube bores and cap interfaces, secure straight and elbow connections, and clean transparent surfaces for visual inspection
Project Support DFM review, mold design, mold trials, assembly validation and repeat production
Customization Geometry, color, texture, resin, inserts and packaging can be developed to project requirements

E-mail Whatsapp