Custom Manufacturing ISO 9001 DFM Support

Medical Flow Control and Tube Connectors

These medical flow control and tube connectors are engineered for respiratory circuits, fluid lines and compact medical flow-control assemblies, from early DFM review through repeat production. The molding plan is developed around controlled internal flow passages, secure tube barbs and connection interfaces, and sealing geometry with low flash and clean edges. Resin selection, gate location, parting lines and inspection points are matched to the mating parts, operating environment and expected production volume.

Controlled Internal Flow Passages
Secure Tube Barbs and Connection Interfaces
Application-Specific Resin Selection
DFM, Tooling and Repeat Production

Product Overview

Tube connections designed for consistent assembly

JingZhan develops custom moulded tube connectors, flow-control housings and related assembly parts. The manufacturing review focuses on the mating tubing, internal passages, retention features and component fit. Any flow-control function is validated in the intended assembly under an agreed test method.

Moulded flow-control housing component samples
Housing examples showing the relationship between the body, internal parts and tube interface.

DESIGN AND MANUFACTURING

Key processing requirements

  • Define the tubing and mating parts. Provide tube dimensions, material information, engagement length and complete assembly CAD. Review connection geometry against actual mating samples during the trial stage.
  • Keep functional passages clear. Identify the bore, cross-port and sealing areas. Plan gates, parting lines and venting to limit flash or moulding marks that could affect the specified function.
  • Separate component fit from flow performance. Agree assembly, retention and leak checks alongside any flow test. Do not infer a calibrated flow rate or pressure rating from the housing geometry.
  • Approve materials for the process. Review the selected grade against contact media, cleaning, temperature and any sterilization process. Confirm colour and material documentation before production.
Pair of clear tube coupling component samples
Clear coupling examples for reviewing bore and engagement geometry.
Small white moulded tube connector samples
Connector examples with different tube-engagement and passage details.

TECHNICAL SPECIFICATIONS

Parameters agreed for your part

Custom-manufacturing options, not common measured values for every pictured part.
Parameter Project specification
Component scope Tube connectors, coupling parts, flow-control housings and related moulded components.
Material options Approved PP, PE, PC or other customer-specified grades, subject to engineering review.
Bore and connection size To customer drawings; no universal connector standard or tubing size is assumed.
Critical features Bores, engagement surfaces, retaining details, sealing interfaces and assembly datums.
Tolerance Drawing-specific requirements with agreed gauges, fixtures and measurement methods.
Functional acceptance Leak, retention and any flow test with defined conditions and acceptance limits.
Tooling Core and cavity arrangement selected for passage geometry and repeat production.
Supply condition Material identification, inspection records, lot labelling and protective packing agreed at quotation.

PRODUCTION AND REPEAT SUPPLY

Equipment, lead time and order planning

The proposed route combines JingZhan's listed CNC/EDM toolroom resources with injection moulding. Press choice depends on cavities, projected area, shot volume and resin. Dimensional or vision inspection is assigned to the actual connector features; any functional test station is defined in the project scope.

Indicative quotation planning only. Final MOQ and lead time are confirmed for the project.
Planning item Basis for quotation
DFM review Indicative 3–5 working days after complete drawings and requirements.
New tooling Indicative 4–6 weeks to first mould trial after tool-design approval and commercial release; corrections and customer validation are additional.
Order quantities Initial planning basis: 500-piece pilot or 1,000-piece repeat batch per part number, resin and colour, subject to quotation.
Repeat orders Indicative 10–15 working days after materials and the production slot are confirmed. Customer qualification, special processing and transit are additional.
Moulded flow-connection housing and mechanism component samples
Related component group illustrating the need to coordinate the housing, moving parts and tube interfaces.

Keep repeat orders on an approved baseline

Approve the part revision, resin and mating assembly before repeat release. Set checks for bores, flash and retention features, and identify shipment lots. Review core wear, tool repairs or material changes that can affect the accepted connection before the next batch is produced.

Tooling investment is quoted separately from the piece price. Share annual demand and the quantity per release so cavity count, material procurement and batch cost can be reviewed together.

RELATED APPLICATIONS

Where these components can be used

  • Tube-connection assemblies in customer-developed medical equipment.
  • Laboratory and diagnostic fluid-handling modules.
  • Flow-control housings and interface parts requiring assembly and functional validation.

Pictured parts do not establish a clinical pressure rating, calibrated flow or sterile condition. Finished-system performance and applicable medical-device requirements are validated separately.

Moulded housing component with a lever and passage opening
Related housing example for reviewing access, retention and mating assembly features.

Discuss your drawing and supply requirements. Send CAD, resin preference, critical features, annual demand and release quantity. Contact our engineering team →

Technical Specifications

Process Custom precision plastic injection molding
Product Group Medical Flow Control and Tube Connectors
Typical Applications respiratory circuits, fluid lines and compact medical flow-control assemblies
Material Options customer-specified transparent or engineering resins selected according to the intended use and applicable regulatory requirements
Engineering Focus controlled internal flow passages, secure tube barbs and connection interfaces, and sealing geometry with low flash and clean edges
Project Support DFM review, mold design, mold trials, assembly validation and repeat production
Customization Geometry, color, texture, resin, inserts and packaging can be developed to project requirements

E-mail Whatsapp